Development Status Of Slitting Machine

Development status of slitting machine

So the mission power of the slitter is a comprehensive concept. During the slitting process, the stable tension system of the full-automatic slitter is a main goal to ensure product quality. The magnetic powder clutch and brake are a special kind of active actuator. The fully-automatic slitter is filled in the mission gap. Or the film is cut into a moment, and the magnetic current of the magnetic powder can be changed by changing the excitation current, and then the transmitted torque can be adjusted. It can be used for stepless speed regulation from zero initial to synchronous speed. It is suitable for high-speed segment fine-tuning and small and medium power speed regulation system. The automatic slitting machine controls the tension between unwinding, traction, slitting, winding, etc., so that the slitting data is always in a fluctuating state during the slitting process.

Assuming that the tension control is stable, the full-automatic cutting machine can prevent the original data from deforming and drifting during the machine's speed increase and decrease. The general meeting will form the sum of the laborious and non-rewinding tension of the next process. Most of the former slitting machines used magnetic powder clutches to control the tension. However, the speed of the magnetic powder clutch cannot be high. When the automatic slitting machine is in operation, it is easy to form high-speed collisions of magnetic powder. A vectorial frequency inverter motor is selected to control the tension system of the slitting machine, and the swing roller is used for active detection, and the man-machine is used for low temperature, and the automatic slitting machine shortens its life. It will be stuck in severe conditions, which will hinder the operation of the machine.

With the development of technology, servo drive skills and other components. It is to divide the raw materials into several independent units. Its mission principle is to fix the raw materials on the unloading (see the left picture). One end of the unloading shaft is equipped with magnetic powder tension control. Device to stabilize the required tension of the raw materials, and then pull the raw materials through a pair of rubber rollers. The automatic slitting machine is cut into several pieces by the blade. It is then guided to the A and B winding shafts by the guide rollers to stop the winding products. The automatic slitter is driven by the main motor to move the rubber roller and the receiving shaft in synchronization to reach the puller.